Ngā Kāwai katoa

Kaainga> production Raina > Poraka Zirconia

3D Pro Multilayer

3D Pro Multilayer

He pai ake te mahi rerehua a 3D Pro, na te mea he pai rawa atu o raatau ahuatanga whakawhiti, kua noho hei whiringa tuatahi i enei ra mo nga keehi me nga whakaritenga rerehua teitei.

Whakapā mai
Ngā tohu:

E waatea ana nga mahi whakaora me nga karauna porohita monolithic, piriti, whakakikorua, kikorangi ranei.

3D Pro Multilayer

  • āhuatanga
  • tāonga
  • Hangarau Tihi
  • Nga Korero Uiui
Features of 3D Pro Multilayer

3D Pro multilayer has been introduced into dental practice as an alternative to metal-ceramic dental restorations. Compared to the traditional porcelain to metal restorations


  • Tauritenga VITA® Classic Shade Match

    Kia kaha te whai i te VITA® Classic Shade mai i te wahanga R&D me te hanga paerewa me te taurite marumaru.

  • keee
    Glazed with Bloomden CeramStar® Glaze/Stain Kit

    Preparation: 3D Pro 3-unit bridge after milled and sintered and then glazed.

  • keee
    Developed an improved flexural strength

    The flexural strength of this new material is 650-1100 MPa. These conveniences have made the 3D Pro multilayer zirconia used more and more for crowns and bridges inlateral applications.

  • feature分辨率2
    Excellent aesthetics performance

    Translucency can be regulated by controlling the absorption, reflection, and transmission of light through the material. The translucency is higher when the reluctance is low and the transmission is high.

  • feature分辨率2
    Compared to previous stage the strength as a trend

    Bloomzir® 3D Pro multilayer zirconia is unlike any other zirconia, it can exhibit a strength range from 650MPa to 1100MPa which can cover posteriors and anteriors for both crowns and bridges including implant restorations.

  • feature分辨率2
    Monoclinic resistance

    Unique hydrolysis microstructure and chemical formulation by the hydrothermal treatment also resist degradation of aging which the cubic shifted to monoclinic state that can be observed in zirconia structure.

  • feature分辨率2
    High speed sintering cycle

    An excellent attributes is the fast sintering cycle which can ensure the strength, translucency and aging resistance simultaneously. The high-productivity sintering cycle allows for “inside furnace” time in 45 minutes.

  • feature分辨率2
    Low Wear Rate

    The average crystalline size of less than 0.5 μm and the Hydrolyzed powder properties are organized inside 3D Pro multilayer zirconia which enable 3D Pro multilayer zirconia to be long-term enamel wear behavior closed to the natural human teeth after several times of lab-test. 

Accessories for 3D Pro Multilayer
  • HeramaStar® Glaze/Taka Gingival whakaturia

    E 4 nga papatipu kotahi me nga wai motuhake me nga taputapu. Ko nga whakapiri 3D i hangaia motuhake mo te whakaotinga rerehua me te tohu o nga waahanga tae-gingival o te whakahokinga uku, he mea hanga ki te lithium disilicate me te 3D Pro Multilayer. Ko nga waahanga katoa o te huinga kei te waatea takitahi.

    Pānuihia atu
  • taputapu分辨率
    HeramaStar® Glaze/Stain Vivid Set

    Kei roto e 7 nga papatipu kotahi tae atu ki nga wai motuhake me nga taputapu. Ko nga whakapiri 2D i hangaia motuhake mo te whakaotinga rerehua taketake o nga whakahoutanga uku, he mea hanga mai i te lithium disilicate me te 3D Pro Multilayer. Ko nga waahanga katoa o te huinga kei te waatea takitahi.

    Pānuihia atu
  • taputapu分辨率
    HeramaStar® Glaze/Stain Blossom Set

    Kei roto 17 papatipu kotahi tae atu ki nga wai motuhake me nga taputapu. Ko nga whakapiri 2D me te 3D me nga stains i hangaia motuhake mo te whakaotinga rerehua ngaio o nga whakaoranga uku, i hangaia mai i te lithium disilicate me te 3D Pro Multilayer. Ko nga waahanga katoa o te huinga kei te waatea takitahi.

    Pānuihia atu
3D Pro Multilayer Technical Specifications
Whakatakotoranga Hangarau
3D Pro Multilayer
ZrO2+HfO2+Y2O3 ≥99%
Y2O3 4.5% -10%
Al2O3 < 0.15%
Density before sintering (g.cm-3) 3.15 ± 0.05
Density after sintering (g.cm-3) 6.07 ± 0.02
CTE (25-500°C) (K-1) 10.5 ± 0.5
Te kaha whiri i muri i te whiri (MPa) > 650
Ko te ihirangi o te wahanga monoclinic mata pakeke < 12%
Te whakawhiti marama < 49%
Te wairewa matū i muri i te whakahiato (µg.cm-2) <100
Te paheketanga 0 Taumata
Irirangi (Bq.g-1) <0.1
Paemahana Waituhi (°C) 1500
Systems 98mm / 95mm / 92*75mm
matotoru 12m / 14mm / 16mm / 18mm
20mm/22mm/25mm
Haurangi A1 A2 A3 A3.5 A4 / B1 B2 B3 B4
C1 C2 C3 C4 / D2 D3 D4 / BL1 BL2 BL3 BL4

 

Nga Korero Uiui